Why wire thread inserts are not always the problem (and where it actually goes wrong in practice)

Comparison of a bad and a good weld

Written on: 08-04-2026 | Sem

In practice, we hear it regularly: “This welding wire doesn’t work properly.”

But in many cases the problem is not with the welding wire itself.
The cause often lies in the setting, application or method of operation — and as a result, unnecessary wire changes are made, while the real problem remains.


Where things often go wrong in practice

In companies that suffer from fluctuating invoice quality, we often see the same patterns:

  • The wire is changed without adjusting the settings.
  • The focus is mainly on price rather than application
  • Problems are reported directly to the material
  • The basics (gas, preparation, parameters) are not correct

Result: more splatters, extra processing and time loss in the workplace.

Comparison of a bad and a good weld


Wire mesh is only one part of the whole

The performance of your laser is always related to several factors:

  • Machine settings (voltage and wire speed)
  • The selected protective gases
  • Material preparation (contamination, rust, coating)
  • Position (position, inside/outside)
  • Experience and approach

If one of these factors is not correct, you will see that reflected in your reading — regardless of which one it is. MIG/MAG welding wire you use it.

👉 Check out our range laser cables to lay the right foundation.


Price vs. performance: where things often go wrong

A cheaper welding wire seems interesting on paper.
But in practice we often see:

  • More splinters → additional grinding
  • Less stable bow → lower speed
  • Irregular laser image → repair work

What you save on purchasing costs is often repaid in labor, grinding discs, and time.

👉 The right choice in, for example metal-filled welding wires can actually lead to higher productivity and less rework.


The difference lies in choosing the correct welding wire.

Not every welding wire is suitable for every application.

Consider differences in:

  • Material (steel, stainless steel, construction)
  • Work (production vs assembly)
  • Positions in which welding is performed
  • Desired speed and finish

A wrong choice leads to frustration and a loss of efficiency.
The right choice creates peace of mind in the process and constant quality.

MIG/MAG welding wire in the workshop


What we see in practice

Companies that have their processes in order:

  • Choose the right welding wire for their application consciously
  • adjust their settings accordingly
  • looking at overall performance, not just price

That's where the difference lies. “it works” and “Everything is going well”.


When it really comes down to it

Of course, wire thread inserts can have an impact. For example, in the following cases:

  • Instable bow
  • Excessive spattering despite correct settings
  • Inconsistent quality per roll

In that case, it is important to look for reliable and consistent MIG/MAG welding wires that fit your application.

Lastechniek Rijnmond buses


Practical advice

Are you encountering problems?

Don't jump to conclusions about a bad wire, but look at the big picture:
installation, gas, preparation and application.

In many cases, the solution lies not in replacement, but in better adjustment.


Our advice

Are you unsure about your current soldering wire or results?

Then it is often resolved more quickly than you might think.
We will look at your situation with you and help you immediately find a solution that works in practice.

👉 View our range laser cables or contact us directly for advice.

Please contact us immediately

Related articles

A Migatronic laser machine is renowned for its reliability, ease of use, and consistent laser quality. In this blog, you’ll discover why these machines are so popular in industry and workshops. We’ll outline the key benefits, compare models, and help you quickly make the right choice for your application. This way, you’ll know exactly which Migatronic machine suits your work.
SG2 wire is the standard for MIG/MAG welding of unalloyed and low-alloyed steel. In this blog, you will discover what SG2 exactly is, why it is so popular, and what you should pay attention to when using it. We explain the technical properties, compare it with other welding wires, and provide practical tips from real-world experience. This way, you will know exactly when SG2 is the right choice and how to get the most out of your welding work.
Discover the benefits and applications of Bohler hard soldering wire fontsargen a 210 k, fontsargen af 320 bf and fontsargen a 314. Perfect for high-quality connections in various industries.

Please contact us by phone

Then contact us immediately by phone and get one of our employees on the line.

+31 168 35 66 77